Minor Correction

The minor correction is a 2 stage machine process to eliminate light swirls and scratches, oxidation, dull and hazy.  The damage is caused by years of poor washing techniques harsh chemicals and UV rays.​

The 1st process is the cutting stage used with the correct pad and compound combo to achieve the desired >80% correction.

The 2nd stage is the refining process to remove any defect caused by the cutting stage, giving the deep “wet look” jewelled finish.​

This is our most poplar service due to the level of finish it will achieve.  Add a hydrophobic or ceramic coating option to lock in the finish for years to come.

• Non acidic wheel cleaner applied before cleaning front and rear of wheels
• Wheel arches thoroughly cleaned
• Door shuts and petrol cap cleaned
• Safe wash process using the two bucket method with ph neutral products
• Decontamination stages tar deposits and iron removed with fallout remover
• Clay bar decontamination to remove any final bonded contaminants leaving a slick finish
• Rinsed with 0ppm pure water
• Dried with plush microfiber drying towels and hot air blow dryer to remove final trapped water
• Cutting stage used to remove swirls, scratches and blemishes resulting in>80% correction
• Refining stage to remove hazing from the cutting stages restoring the deep high gloss and shine
• Paintwork wiped down panel wipe or IPA to remove remaining polish residues and oils leaving the perfect clean base for protective coatings to bond to
• A layer of synthetic sealant and/or a carnauba wax applied (see upgrades to ceramic paint protection)
• Exterior trim dressed with a permanent trim restorer
• Glass polished/cleaned throughout
• Tyres dressed
• Exhaust tail pipes cleaned
• Final inspection and wipe down with a spray coating with panel gaps and badges, etc, cleaned down with toothpicks and our microfiber smart cards